Industrial safety shower, freestanding, stainless steel, floor mounted, body safety shower - PremiumLine - BR 830 095 | B-Safety
Industrial safety shower, freestanding, stainless steel, floor mounted, body safety shower - PremiumLine - BR 830 095 | B-Safety

Industrial safety shower, freestanding, stainless steel, floor mounted, body safety shower - PremiumLine - BR 830 095 | B-Safety

B-Safety BR 830 095 PremiumLine Emergency Body Shower

Floor-mounted emergency body shower designed for industrial environments with potential exposure to chemicals, hot liquids, or contaminants. Constructed from polished AISI 316 stainless steel, suitable for laboratories, production areas, chemical storage, and facilities with stringent cleaning requirements.

Technical Data

  • Type: Standalone, floor-mounted, free-standing
  • Overall height: 2300 mm
  • Spray arm length: 630 mm
  • Base: Stainless steel plate Ø200 mm, 4 mounting holes
  • Water connection: 1 ¼” female, top and bottom inlets for circulation lines
  • Operating pressure: 1.5–3 bar dynamic
  • Flow rate: 50 l/min, integrated flow regulator
  • Ball valve: ¾”, AISI 316 stainless steel, quick-connect system
  • Activation: Stainless steel pull rod, 700 mm, with operating ring

Materials and Functional Performance

Spray head, piping, base, valve, tees, and activation rod are AISI 316 stainless steel. Flow regulator is POM. The self-draining spray head minimizes water retention post-use, reducing scale formation—critical for units subject to periodic testing.

Standards and Certifications

Complies with EN 15154-1:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also referenced: DIN-DVGW / DVGW NW-0416CL0425 and GOST-R. Marking per EN ISO 7010 and ASR A1.3.

Flow Variants

  • BR 830 095: 50 l/min, hazard category I (EN 15154-5:2019)
  • BR 830 095 / 75L: 75 l/min / 20 GPM, category II
  • BR 830 095 / 110L: 110 l/min, category III

Optional Accessories

Available: activation platform, 1 ¼” maintenance valve, thermostatic mixing valve 20–43°C with 43°C scald protection, IP65 flow switch, EX Zone 1 & 2 version, alarm system, anti-freeze valve, and overheat protection valve.

FAQ

Typical Applications: Chemical plants, laboratories, CIP areas, acid/alkali storage, and drum filling stations.

Maintenance Requirements: Periodic flow testing, valve leakage inspection, spray head drainage check, and verification of activation rod accessibility.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification-and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72