Body safety shower stainless steel, above door installation - PremiumLine - BR 084 095 | B-Safety B-Safety - 1
Body safety shower stainless steel, above door installation - PremiumLine - BR 084 095 | B-Safety B-Safety - 1

Body safety shower stainless steel, above door installation - PremiumLine - BR 084 095 | B-Safety

Body Safety Shower B-Safety BR 084 095 PremiumLine

Body safety shower designed for installation above doorways, featuring exposed piping and a ¾" female hydraulic connection. The ball valve with pull rod can be positioned on either side of the door, allowing activation to be aligned with escape routes or site layout requirements.

Construction

  • Material: Stainless steel, polished finish
  • Shower head: AISI 316
  • Ball valve: AISI 316
  • Piping: AISI 316
  • Wall flange: AISI 316, 4 mounting holes
  • Pull rod with ring: AISI 316, length 700 mm
  • Flow regulator: POM

Hydraulic Data

Standard model BR 084 095 operates at dynamic pressure 1.5–3 bar with a flow rate of 50 l/min. Arm projection is 525 mm; installation height is 2345 mm ±100 mm. The shower head is self-draining to minimize water retention after testing or use.

Flow Rate Variants

  • 50 l/min: hazard class I (EN 15154-5:2019)
  • 75 l/min / 20 GPM: hazard class II
  • 110 l/min: hazard class III

Selection is based on risk assessment, available network flow, chemical exposure type, and operator access requirements.

Standards and Options

Compliant with EN 15154-1:2006, EN 15154-5:2019, ANSI Z358.1-2014, DIN 1988, EN 1717, DIN-DVGW / DVGW NW-0416CL0425, GOST-R. Options include ¾" service shut-off, thermostatic mixing (20–43 °C), IP65 flow switch, EX zone 1 & 2 switch, and 230 V / 50 Hz alarm.

Typical Applications

Chemical laboratories, production area exits, chemical storage, surface treatment lines, paint shops, and locations where above-door installation conserves space and maintains personnel egress.

Datasheet and documents

Description

Technical Specifications

  • Material: Stainless steel
  • Surface: polished
  • Projection: 525 mm
  • Installation height: 2345 mm (± 100 mm)
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meters.

DVGW
ISO9001_D_72

Technical Description

  • ball valve with pull rod actuation on wall flange, can be mounted either on the right or left side of the door, of stainless steel, DIN-DVGW tested and certificated, water inlet ¾” female
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • holder for pull rod made of stainless steel, polished
  • connection pipe ¾“ of stainless steel, polished, length 500 mm
  • wall flange with 4 mounting holes of stainless steel, polished
  • wall shower arm ¾“ of stainless steel, polished, projection 525 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 2345 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72