Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 1
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 2
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 3
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 4
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 5
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 1
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 2
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 3
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 4
Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095 B-Safety - 5

Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτη λεκάνη τύπος PremiumLine BR 305 095

B-Safety PremiumLine BR 305 095 – ντους οφθαλμών με ανοξείδωτη λεκάνη και στήλη

Το BR 305 095 είναι σταθερό ντους ασφαλείας οφθαλμών με δύο κεφαλές ψεκασμού, ανοξείδωτη λεκάνη και κατακόρυφη στήλη. Χρησιμοποιείται σε μόνιμα σημεία έκπλυσης όπου απαιτείται σύνδεση νερού από άνω ή κάτω παροχή, αντί απλής επιτοίχιας εγκατάστασης.

Τεχνικά χαρακτηριστικά

  • Παροχή: 14 l/min
  • Πίεση λειτουργίας: 2,5–5 bar
  • Είσοδος νερού: 1¼” θηλυκό
  • Έξοδος λεκάνης: 1¼” αρσενικό
  • Συνολικό ύψος: 1110 mm
  • Προβολή: 425 mm
  • Πλάτος με μοχλό: 400 mm
  • Λεκάνη: ανοξείδωτη, γυαλισμένη, Ø275 mm

Κατασκευή και λειτουργία

Η βάση είναι ανοξείδωτη πλάκα 200 × 200 mm με τέσσερις οπές στερέωσης. Η στήλη 1¼” είναι από ανοξείδωτο χάλυβα, γυαλισμένη, με δυνατότητα άνω ή κάτω υδραυλικής σύνδεσης.

Η ενεργοποίηση γίνεται με σφαιρική βάνα ½” από ανοξείδωτο χάλυβα και μεγάλη πλάκα PUSH μήκους 240 mm, φωτοφωταυγή κατά DIN 67510. Ο ενσωματωμένος ρυθμιστής ροής περιορίζει την παροχή στα 14 l/min, ώστε το μοτίβο ψεκασμού να παραμένει εντός προδιαγραφών στο εύρος 2,5–5 bar.

Κεφαλές ψεκασμού

Οι κεφαλές είναι ανοξείδωτες, γυαλισμένες, με πλαστική πλάκα ψεκασμού, ελαστικά προστατευτικά και στεγανοποιημένα καλύμματα σκόνης. Τα καλύμματα ανοίγουν με την πίεση του νερού κατά την ενεργοποίηση. Οι μεγάλες οπές περιορίζουν την παραμονή στάσιμου νερού και τις επικαθίσεις αλάτων.

Πρότυπα και εφαρμογές

Το προϊόν αναφέρεται σύμφωνα με EN 15154-2:2006, ANSI Z358.1-2014, DIN 1988, EN 1717, BGI/GUV-I 850-0 και DIN-DVGW NW-0417CL0263.

Κατάλληλο για εργαστήρια χημικών, μονάδες επεξεργασίας νερού, βαφεία, χώρους CIP, σταθμούς δειγματοληψίας και τμήματα συντήρησης.

Διαφορά από BR 305 085

Το BR 305 095 διαθέτει ανοξείδωτη γυαλισμένη κατασκευή και ανοξείδωτη λεκάνη, ενώ το BR 305 085 είναι η αντίστοιχη ClassicLine διαμόρφωση με διαφορετική φιλοσοφία υλικών.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: Stainless steel
  • Surface: polished
  • Dimensions (H x W): 1110 x 400 mm
  • Operating pressure: 2.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: 1 ¼” female
  • Water outlet: 1 ¼” male

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. Dust caps on the shower head protect against contamination and open automatically when the eye shower is actuated by the water pressure The large holes in the shower heads prevent standing water and thus calcification.

DVGW
ISO9001_D_72

Technical Description

  • base plate with 4 mounting holes of stainless steel, polished, dimensions 200 x 200 mm
  • stand pipe 1 ¼” of stainless steel, polished, with top and bottom water inlet 1 ¼” female, total height 1110 mm
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 240 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2.5 to 5 bar flow pressure
  • high-performance spray heads made of stainless for large-scale dispersion of water, polished, with plastic spray plate, low calcification, incl. rubber sleeves and sealed dust caps, mounted over distributor fork
  • bowl made of stainless steel, diameter 275 mm, polished, water outlet 1 ¼” male
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • total height 1110 mm, projection 425 mm, overall width incl. lever 400 mm
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72.png