Body safety shower wall mounted, exposed pipework - PremiumLine - BR 025 995 | B-Safety

Safety Shower Valve B-Safety BR 025 995

Wall-mounted safety shower valve for exposed piping, equipped with a ¾” ball valve and integrated drain. Designed for installations where the pipe section between valve and shower head must be emptied after operation or testing. Actuation is manual via a stainless steel lever; the valve is not self-closing.

Technical Data

• Water connection: Rp ¾” female
• Operating pressure: 1–5 bar
• Flow rate: ≥60 l/min at 1 bar flow pressure
• Opening angle: 90°
• Operation: manual, non-self-closing
• Lever: AISI 316, polished, length 160 mm
• Handle: plastic, black, Ø25 mm, length 90 mm
• Drain: integrated, automatic or manual emptying

Construction Materials

Valve body, ball, and lever are AISI 316 stainless steel. Handle and drain fitting are plastic. Seat and internal sealing materials are not specified in the technical sheet and must be confirmed for use with chlorinated, deionized, or thermally treated water.

Applications

Suitable for fixed emergency showers in chemical plants, laboratories, chemical loading areas, technical corridors, and industrial safety water networks. Recommended installation at operator height, with handle up to 1750 mm above floor level.

Standards and Installation

Complies with DIN EN 15154-1:2006, DIN EN 15154-5:2019, ANSI Z358.1-2014, DIN 1988, DIN EN 1717, BGI/GUV-I 850-0, and GOST-R. For DIN EN 15154-1 compliance, the section between valve and shower head must self-drain.

Dimensional Note

Dimensions listed as 115 × 105 × 100 mm; technical PDF states 140 × 105 × 100 mm. Confirm final dimensions with manufacturer drawing for technical submissions.

FAQ

When is BR 025 995 selected over BR 023 995?
When exposed wall piping with integrated drain and direct valve actuation is required.

Is an electric or pneumatic actuator available?
The technical sheet specifies manual lever operation only; no actuator option is described.