Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 995 | B-Safety

Safety Shower Valve B-Safety BR 022 995

Wall-mounted activation valve for emergency safety showers, designed for exposed piping. Features a stainless steel ball valve and manual pull rod actuator. The unit can be installed on either side of the access point to maintain visible and immediate operability.

Technical Specifications

• Water connection: Rp ¾” female
• Operating pressure: 1–5 bar
• Flow rate: ≥60 l/min at 1 bar dynamic pressure
• Opening angle: 90°
• Operation: non-self-closing (manual reset required)
• Dimensions: 700 × 172 × 80 mm
• Pull rod with ring handle: length 700 mm
• Handle lower edge height: 0–1750 mm above floor, per applicable standards

Construction Materials

BR 022 995 is manufactured from polished stainless steel. Technical documentation specifies AISI 316 for valve body, ball, lever, clevis, pull rod, and rod support. The “OPEN” indicator plate is orange, photoluminescent plastic (DIN 67510).

Applications

Intended for fixed emergency showers in industrial environments with risk of exposure to chemicals, hot liquids, or contaminated media. Suitable for potable or process water in personnel safety installations.

Standards and Installation

Complies with DIN EN 15154-1:2006, DIN EN 15154-5:2019, ANSI Z358.1-2014, and GOST-R. For DIN EN 15154-1 compliance, the pipe section between valve and shower head must be self-draining.

Variant Comparison: BR 022 995 vs BR 022 985

BR 022 995 features AISI 316 stainless steel components and polished finish for enhanced material compatibility in corrosive or frequently washed industrial settings.

FAQ

Does the valve close automatically?
No. Manual reset is required; valve remains open until manually closed.

What should be verified before procurement?
Available pressure, flow ≥60 l/min, handle height, installation side, and self-draining requirement for piping.