Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety - B-Safety
Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety - B-Safety
Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety - B-Safety
Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety - B-Safety
Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety - B-Safety
Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety - B-Safety

Body safety shower wall mounted, exposed pipework - PremiumLine - BR 022 985 | B-Safety

B-Safety BR 022 985 Safety Shower Valve

Manual activation valve for safety showers, designed for wall-mounted installations with exposed piping. The assembly utilizes a ball valve actuated via a vertical pull rod and ring handle, enabling immediate manual operation in environments with chemical exposure or thermal hazards. Suitable for integration into emergency decontamination systems.

Technical Specifications

  • Inlet connection: ¾” female thread
  • Operating pressure: 1–5 bar
  • Flow rate: ≥60 l/min at 1 bar dynamic pressure
  • Opening angle: 90°
  • Operation: non-self-closing (manual reset required)
  • Dimensions: 700 × 172 × 80 mm
  • Mounting: right or left of door/access point

Construction Materials

Flange support: stainless steel AISI 304. Ball valve: AISI 316. Pull rod, lever, and rod support: AISI 201. Clevis: galvanized steel Q235. Powder coating (green) is applied to components exposed to industrial environments for corrosion resistance.

Applications

Used in chemical plants, laboratories, processing units, chemical loading areas, boiler rooms, and locations requiring fixed emergency body wash points. Compatible with potable water or process water suitable for emergency shower systems.

Standards and Installation

Complies with DIN EN 15154-1:2006, DIN EN 15154-5:2019, and ANSI Z358.1-2014. DIN EN 15154-1 installation requires self-draining between valve and shower head. Referenced standards: DIN 1988, DIN EN 1717 (backflow protection), DIN 67510 (photoluminescent “OPEN” marking).

FAQ

Does the valve close automatically?
No. The valve is non-self-closing; flow remains active until manually reset.

What should be checked before selection?
Available supply pressure, minimum flow ≥60 l/min, access location, handle height, and possibility of pipe self-draining.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, steel
  • Colour: green
  • Dimensions (H x W x D): 700 x 172 x 80 mm
  • Operating pressure: 1 to 5 bar
  • Flow rate: at least 60 l/min at 1 bar flow pressure
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The rod operated safety shower valve consists of a robust ball valve with drinking water approval, which can be mounted either to the right or left of the door. The volume flow is at least 60 liters / minute at 1 bar flow pressure. An additional holder ensures positioning of the pull rod.

Mounting-Instructions:

For an installation in accordance with EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.

DVGW
ISO9001_D_72

Technical Description

  • ball valve with pull rod actuation on wall flange of stainless steel, can be mounted either on the right or left side of the door, DIN-DVGW tested and certificated, water inlet ¾” female
  • flow rate at least 60 l/min at 1 bar flow pressure
  • pull rod with ring handle made of steel, chemical resistant powder coated, length 700 mm
  • holder for pull rod made of steel, chemical resistant green powder coated
  • opening angle 90°, not self-closing
  • information sign “OPEN” for confusion-free use in an emergency, orange, photoluminescent according to DIN 67510
  • mounting height for lower edge of pull rod handle according to the standards listed below: 0 to 1750 mm height above floor
  • according to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
  • according to ANSI Z358.1-2014, DIN EN 15154-1:2006 and DIN EN 15154-5:2019

Certification

DVGW    ISO9001_D_72