Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - PremiumLine - BR 838 095 | B-Safety B-Safety -
Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - PremiumLine - BR 838 095 | B-Safety B-Safety -

Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - PremiumLine - BR 838 095 | B-Safety

B-Safety BR 838 095 PremiumLine

Floor-mounted emergency safety shower with integrated eye/face wash unit, ABS bowl, and lid. Designed for industrial environments with potential exposure to hazardous chemicals affecting the face, eyes, and body, such as chemical processing, laboratories, container filling stations, and water treatment facilities.

Technical Data

  • Type: Free-standing, floor-mounted
  • Construction: Stainless steel AISI 316, polished finish
  • Dimensions: 2300 x 355 x 630 mm
  • Water connection: 1 ¼” female, top/bottom inlet for circulation lines
  • Bowl outlet: 1 ½” male
  • Operating pressure: 1.5–3 bar
  • Body flow rate: 50 l/min
  • Eye/face flow rate: 14 l/min
  • Body activation: 700 mm pull rod
  • Eye/face activation: lowering the bowl lid

Construction and Operation

Spray head, piping, base, ¾” ball valve, pull rod, and connection fittings are AISI 316 stainless steel. The body spray head is self-draining and includes a 50 l/min flow regulator for consistent spray pattern within 1.5–3 bar dynamic pressure range.

The eye/face wash unit features ABS body, bowl, and UV/impact-resistant lid. The lid serves as both dust protection and activation lever. Aerators are chrome-plated brass with integrated 3/8” regulating valve for spray height and flow adjustment.

Standards and Versions

Compliant with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also references DIN-DVGW/DVGW, EN 1717, DIN 1988, and GOST-R. Body flow variants: 50 l/min (hazard class I), 75 l/min (class II), 110 l/min (class III).

Maintenance

Periodic inspection should verify flow rates, dynamic pressure, valve tightness, aerator cleanliness, unobstructed bowl drainage, and correct activation via lid mechanism.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification-and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • integrated PremiumLine eye-/face wash unit with bowl and lid for mounting on standpipe, position and orientation freely selectable
  • housing, lid and bowl made of UV and impact resistant ABS plastics, water outlet 1 ½“ male
  • integrated protective cover against dust
  • actuation by pulling down the lid
  • ball valve 3/8“ of brass with lever actuation by lid, DIN-DVGW tested and certificated
  • aerators made of brass with a very limited spray pattern, chrome-plated
  • with integrated flow regulation valve 3/8” for setting the desired spray height and flow rate, water inlet 3/8” male
  • inclusive sign for eye shower according to EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72