Inox-val 2 Piece Ball Valves V Control - 700355 C1-C2-C3 | Valpres

Valpres 700355 C1-C2-C3 Analog V-Ball Control Ball Valve

The Valpres 700355 C1-C2-C3 is a two-piece, V-ball control ball valve designed for modulating flow applications. Constructed from stainless steel A351-CF8M, it features a V-port ball for precise pressure and flow regulation. Unlike standard on/off ball valves, this model is intended for applications requiring controlled, proportional flow adjustment rather than simple open/close operation.

Technical Data

• Connection: Female/female threaded ISO 7 Rp / EN 10226-1
• Body and end material: ASTM A351 CF8M
• Ball: A479 TP316 / A351 CF8M
• Seats: RPTFE
• Body gasket: PTFE
• Thrust ring: TFM-MPTFE
• O-ring: FKM
• Shaft: A479 TP316 / 17-4 PH
• Operating temperature: -20°C to +160°C
• Sizes: DN15 to DN80
• Pressure rating: PN64 up to DN50, PN25 for DN65–DN80
• Mounting pad: ISO 5211 direct mount
• Certifications: ATEX, SIL 3

V-Ball and Flow Control

The V-notch ball enables predictable flow modulation at partial openings compared to standard full-port balls. Available V-port options include V90, V60, and V30-60, selected based on required flow characteristic and available differential pressure. Refer to technical datasheets for Kv/Cv values and flow curves.

Applications

Suitable for process water, utility lines, and chemical services compatible with CF8M/RPTFE/FKM. Used in industrial systems requiring analog flow control with pneumatic or electric actuators. For continuous regulation, verify Kv/Cv, differential pressure, cavitation risk, flow velocity, and seat wear.

FAQ

When is this valve selected over a standard ball valve?
When the process requires controlled, proportional flow rather than simple open/close service.

What is required for actuator selection?
Specify DN, pressure, temperature, torque, V-port type, control signal, and fail-open/fail-close requirement.