List of products by brand Ari-Armaturen

  • ARI-Armaturen – Technical profile of a steam, control valve and industrial valve manufacturer

    ARI-Armaturen is a German manufacturer of valves and equipment for steam, condensate, thermal oil, hot water, cooling water, HVAC and industrial process systems. Its product range covers isolation valves, control valves, pressure reducing valves, safety valves, steam traps, strainers, check valves and condensate handling equipment.

    The main product areas include:

    • globe stop valves,
    • bellow seal valves,
    • control valves,
    • pressure reducing valves,
    • safety valves,
    • steam traps,
    • check valves,
    • strainers,
    • condensate pumps,
    • heat transfer and steam system components.

    ARI globe valves are used for isolation and throttling in steam, water and thermal fluid systems. Bellow seal valves are selected where stem leakage must be reduced, especially in steam, thermal oil or media where fugitive emissions are a concern.

    ARI control valves are used for modulating control of temperature, pressure, flow and level. Selection requires Kv calculation, pressure drop, medium, temperature, leakage class, actuator force, fail position and possible checks for cavitation, flashing or noise.

    Steam traps and condensate equipment are part of the steam balance. They must be selected according to condensate load, differential pressure, back pressure, start-up load, air venting and system layout.

    Pressure reducing and safety valves have different functions. A pressure reducing valve controls downstream pressure. A safety valve protects equipment from overpressure and must be sized according to the relief scenario.

    ARI products are relevant for steam specialists, HVAC engineers, process engineers and maintenance departments working with steam, condensate and industrial utilities. Selection must be based on actual operating conditions, not only nominal diameter.

Gate valve soft seal - EURO WEDI | ARI | Philippopoulos s.a.

Gate valve soft seal - EURO WEDI | ARI

Gate valve soft seal - EURO WEDI | ARI
Ari-Armaturen
ARI EURO-WEDI – Soft-Sealing Shut-Off Valve The ARI EURO-WEDI is a manually operated shut-off/throttling valve with an EPDM soft seal, designed for heating and cooling water networks, as well as neutral industrial fluids compatible with EPDM. It is not intended for steam or media containing mineral oils. Technical Specifications Nominal Pressure: PN6 or...
View
Globe valve - FABA SUPRA C | ARI | Philippopoulos s.a.

Globe valve - FABA SUPRA C | ARI

Globe valve - FABA SUPRA C | ARI
Ari-Armaturen
ARI-FABA®-Supra C — Bellows Seal Valve for Chemical and Industrial Processes The ARI-FABA®-Supra C is a manually operated globe stop valve with a metallic bellows, designed for isolation and limited flow regulation in steam lines, hot water, thermal oil, gases, and process liquids. The C version corresponds to the Chemical version: the bellows is...
View
Globe valve - FABA SUPRA C ANSI | ARI | Philippopoulos s.a.

Globe valve - FABA SUPRA C ANSI | ARI

Globe valve - FABA SUPRA C ANSI | ARI
Ari-Armaturen
ARI-FABA®-Supra C ANSI — Bellows Seal Chemical Version The ARI-FABA®-Supra C ANSI is a globe stop valve with a bellows seal designed for isolating steam lines, hot water, thermal oil, gases, and process liquids. The Supra C version is the chemical version of the series, featuring a V-port plug and marginal seat as standard configuration. Connection...
View
Globe valve - FABA SUPRA I | ARI | Philippopoulos s.a.

Globe valve - FABA SUPRA I | ARI

Globe valve - FABA SUPRA I | ARI
Ari-Armaturen
ARI-FABA®-Supra I — Industrial Bellows Seal Valve The ARI-FABA®-Supra I is a globe-type isolation valve with a metallic bellows, designed for systems requiring stem leakage prevention in steam, condensates, hot water, thermal circuits, and auxiliary process lines. The I version is the industrial version: the bellows is shielded and positioned outside the...
View
Globe Valve - FABA SUPRA I ANSI | ARI | Philippopoulos s.a.

Globe Valve - FABA SUPRA I ANSI | ARI

Globe Valve - FABA SUPRA I ANSI | ARI
Ari-Armaturen
ARI-FABA®-Supra I ANSI — Bellows Seal Industrial Version The ARI-FABA®-Supra I ANSI is a globe stop valve with a metallic bellows designed for isolation or controlled throttling in steam lines, condensates, hot water, thermal oil, gases, and process liquids. The Supra I version features the bellows outside the main flow path, making it suitable for...
View
Globe valve - STOBU | ARI | Philippopoulos s.a.

Globe valve - STOBU | ARI

Globe valve - STOBU | ARI
Ari-Armaturen
ARI-STOBU Globe Valve with Stuffing Box The ARI-STOBU is a globe valve designed for isolation and, where the plug configuration allows, limited flow regulation. It is used in steam, condensate, hot water, gas, and industrial fluid lines, with material selection based on pressure, temperature, and chemical compatibility. Technical Specifications Available...
View
Liquid Drainer | ARI | Philippopoulos s.a.

Liquid Drainer | ARI

Liquid Drainer | ARI
Ari-Armaturen
Automatic Drain Valve ARI CONA 665 The ARI CONA 665 is an automatic liquid drain valve designed for the removal of condensate from steam lines during startup and shutdown. Its operation is based on a spring and bimetallic controller; it remains open in a depressurized network and closes when the set differential pressure is reached, factory set at ≥1.5...
View
Liquid return temperature limiter | ARI | Philippopoulos s.a.

Liquid return temperature limiter | ARI

Liquid return temperature limiter | ARI
Ari-Armaturen
ARI CONA 650 Return Temperature Limiter The ARI CONA 650 is a self-acting return temperature limiter for hot water circuits and compatible fluids in heating systems. It regulates flow based on return temperature: the valve opens more as temperature drops and restricts flow as it rises. Even in a closed position, a small flow is maintained to provide the...
View
Piston Check Valve - CHECKO V | ARI | Philippopoulos s.a.

Piston Check Valve - CHECKO V | ARI

Piston Check Valve - CHECKO V | ARI
Ari-Armaturen
ARI-CHECKO®-V Piston Check Valve The ARI-CHECKO®-V is a piston-guided, spring-loaded check valve designed to prevent reverse flow in industrial piping systems. The process medium lifts the piston from below; when upstream pressure drops below the opening pressure, the valve closes mechanically. No actuator is required; operation is based on differential...
View
Pneumatic actuator - DP | ARI | Philippopoulos s.a.

Pneumatic actuator - DP | ARI

Pneumatic actuator - DP | ARI
Ari-Armaturen
Pneumatic Linear Actuator ARI-DP The ARI-DP actuator converts a pneumatic control signal into linear stem movement for control and shut-off valves. Series variants include DP30, DP32, DP33, DP34, DP34T, DP34Tri, and DP35, supporting strokes up to 120 mm and supply air pressures up to 6 bar, depending on model. Operation and Selection Rolling diaphragm...
View
Pressure reducing valve - PREDU | ARI | Philippopoulos s.a.

Pressure reducing valve - PREDU | ARI

Pressure reducing valve - PREDU | ARI
Ari-Armaturen
ARI-PREDU Direct-Acting Pressure Reducer The ARI-PREDU is a self-acting proportional pressure reducer designed to lower high inlet pressure to a reduced outlet pressure. The downstream pressure is transmitted to the DMA diaphragm actuator via an impulse line; as downstream pressure increases, the valve moves towards closure. No auxiliary energy is...
View
Pressure regulating valve - PRESO | ARI | Philippopoulos s.a.

Pressure regulating valve - PRESO | ARI

Pressure regulating valve - PRESO | ARI
Ari-Armaturen
ARI-PRESO Differential Pressure Control and Regulating Valve The ARI-PRESO is a self-acting differential pressure control valve designed for hydraulic and industrial piping systems where a constant differential pressure must be maintained regardless of flow fluctuations or system load changes. Operation is based on a spring-loaded mechanism with a...
View
Pressure reducing station - PREsys S | ARI | Philippopoulos s.a.

Pressure reducing station - PREsys S | ARI

Pressure reducing station - PREsys S | ARI
Ari-Armaturen
ARI-PREsys®-S – Steam Pressure Reduction Station The ARI-PREsys®-S is a pre-assembled pressure reduction station for steam networks, designed to adjust from a higher inlet pressure P1 to a lower operating pressure P2. It can be configured as a standalone direct-acting unit or with electropneumatic control via transmitter, PID controller, and positioner....
View
Safety valve - SAFE | ARI | Philippopoulos s.a.

Safety valve - SAFE | ARI

Safety valve - SAFE | ARI
Ari-Armaturen
ARI-SAFE Spring-Loaded Safety Valves ARI-SAFE valves are direct-acting, spring-loaded safety valves designed for overpressure protection of vessels, heat exchangers, steam, water, air networks, and thermal installations. Available as full-lift (D/G) and standard-lift (F) types. Standards and Certifications Design and sizing in accordance with DIN EN ISO...
View
Safety valves - SAFE P | ARI | Philippopoulos s.a.

Safety valves - SAFE P | ARI

Safety valves - SAFE P | ARI
Ari-Armaturen
ARI-SAFE-P Spring Loaded Safety Valve The ARI-SAFE-P is a direct spring-loaded safety valve designed for overpressure protection of pressurized equipment in steam, air, and water systems. The series includes types 921, 922, 923, and 924, differentiated by cap design, lift lever configuration, and spring cover arrangement. Technical Specifications Design:...
View
Safety valves API526 - SAFE REYCO R Series | ARI | Philippopoulos s.a.

Safety valves API526 - SAFE REYCO R Series | ARI

Safety valves API526 - SAFE REYCO R Series | ARI
Ari-Armaturen
ARI-REYCO RL Series ANSI Pressure Relief Valves The ARI-REYCO RL Series are spring-loaded, direct-acting full nozzle safety/relief valves designed for gases, steam, and liquids. The RL Series covers small to medium relief capacities, with NPT, socket weld, butt weld, or ASME B16.5 flanged connections. Variants Fig. 966: Closed lever for manual lift...
View
Safety valves API526 - SAFE REYCO RL Series | ARI | Philippopoulos s.a.

Safety valves API526 - SAFE REYCO RL Series | ARI

Safety valves API526 - SAFE REYCO RL Series | ARI
Ari-Armaturen
ARI-REYCO R Series API 526 Safety Relief Valves The ARI-REYCO R Series are flanged, spring-loaded, direct-acting safety relief valves with full nozzle design, engineered for installations in accordance with API 526 and ASME Section VIII Div. 1. Certified with UV-stamp / NB-stamp for set pressures above 15 psig. Technical Specifications Types: Fig....
View
Safety valves - SAFE SN ANSI | ARI | Philippopoulos s.a.

Safety valves - SAFE SN ANSI | ARI

Safety valves - SAFE SN ANSI | ARI
Ari-Armaturen
ARI-SAFE-SN ANSI Safety Relief Valve ASME The ARI-SAFE-SN ANSI is a spring-loaded, direct-acting safety relief valve of semi-nozzle design, intended for the protection of pressure vessels, steam lines, gas, vapor, and liquid systems against overpressure. The valve is type-tested in accordance with ASME Section VIII Division 1 and is supplied with UV-stamp...
View
Safety valves - SAFE TC | ARI | Philippopoulos s.a.

Safety valves - SAFE TC | ARI

Safety valves - SAFE TC | ARI
Ari-Armaturen
ARI-SAFE-TC Spring-Loaded Safety Valves ARI-SAFE-TC are direct-acting, spring-loaded threaded safety valves designed for overpressure protection of pressurized equipment. Suitable for steam, air, water, and thermal circuits with small diameters. Connections: BSP / DIN ISO 228 Part 1. Variants 941 / 942 / 943 941: Closed manual lift device, closed spring...
View
Safety valves - SAFE TCP | ARI | Philippopoulos s.a.

Safety valves - SAFE TCP | ARI

Safety valves - SAFE TCP | ARI
Ari-Armaturen
ARI-SAFE-TCP Safety Valve PN100 The ARI-SAFE-TCP is a direct-acting, spring-loaded, threaded safety valve designed for overpressure protection of small pipelines, vessels, and auxiliary equipment. The series covers types 961, 962, and 963 in standard D/G/F configurations. No external actuator is required; valve actuation is achieved by process pressure...
View
Safety valves - SAFE TCS | ARI | Philippopoulos s.a.

Safety valves - SAFE TCS | ARI

Safety valves - SAFE TCS | ARI
Ari-Armaturen
ARI-SAFE-TCS Safety Valve PN100 The ARI-SAFE-TCS is a direct-acting, spring-loaded, threaded safety valve designed for the protection of small pipelines and pressure equipment. The series includes types 951, 952, and 953, suitable for steam, air, and water applications. Horizontal installation is permitted up to 5 bar set pressure if specified at order....
View
Strainers | ARI | Philippopoulos s.a.

Strainers | ARI

Strainers | ARI
Ari-Armaturen
ARI Line Filters ARI line filters are specified for the retention of solid particles in steam, water, condensate, and various industrial fluids. Typical installation points include upstream of control valves, steam traps, heat exchangers, pumps, and instrumentation. Selection is based on nominal diameter (DN), pressure class (PN), body material,...
View
Temperature controller TEMPTROL - 771 LCG | ARI | Philippopoulos s.a.

Temperature controller TEMPTROL - 771 LCG | ARI

Temperature controller TEMPTROL - 771 LCG | ARI
Ari-Armaturen
ARI TEMPTROL 771 LCG – Thermostatic 2-Way Valve with Threaded Connection The ARI TEMPTROL 771 LCG is a self-acting thermostatic shut-off valve, designed for straight flow with BSP threaded connections. The LCG version lacks a pressure balancing bellows and is intended for applications where the available differential pressure remains within the selection...
View
Temperature controller TEMPTROL - 771/772 | ARI | Philippopoulos s.a.

Temperature controller TEMPTROL - 771/772 | ARI

Temperature controller TEMPTROL - 771/772 | ARI
Ari-Armaturen
ARI TEMPTROL 771/772 – Thermostatic 2-Way Valve The ARI TEMPTROL 771/772 is a self-acting thermostatic valve with a flanged connection, designed for temperature regulation without auxiliary energy. Its operation relies on a thermal controller with a sensor and capillary tube; an increase in temperature at the sensor reduces flow through the shut-off...
View