Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety - B-Safety
Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety - B-Safety
Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety - B-Safety
Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety - B-Safety
Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety - B-Safety
Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety - B-Safety

Body safety shower wall mounted, recessed version - PremiumLine - BR 028 995 | B-Safety

B-Safety BR 028 995 Safety Shower Valve

The BR 028 995 is a recessed, wall-mounted safety shower valve housed in a stainless steel cabinet with a removable cover for maintenance access. The assembly includes a ¾” stainless steel ball valve, lever operation, and integrated drain, allowing the downstream section to the shower head to be emptied after use or periodic testing. This design supports compliance with self-draining requirements in safety shower installations.

Technical Data

  • Inlet connection: ¾” female
  • Operating pressure: 1–5 bar
  • Flow rate: ≥60 l/min at 1 bar differential pressure
  • Ball valve: stainless steel, DIN-DVGW tested/certified
  • Actuation: stainless steel lever, 160 mm
  • Opening angle: 90°
  • Operation: non-self-closing
  • Handle: black plastic, Ø25 mm, length 90 mm
  • Lever height: 0–1750 mm above floor

Construction and Materials

The cabinet is recessed with a removable cover. Manufacturer documentation lists dimensions as 400 × 300 mm (cabinet) and 350 × 251 × 62 mm (installation). Product page lists 400 × 270 mm and 350 × 220 × 60 mm. For technical submissions, confirm with manufacturer drawings.

Cover plate: AISI 304. Ball valve, threaded connections, tee, connection fitting, and lever: AISI 316. Drain valve and base: brass/plastic.

Applications

Used in emergency shower systems for chemical plants, laboratories, chemical loading areas, and safety water networks where recessed installation and periodic valve access are required for inspection and maintenance.

Standards

Complies with DIN EN 15154-1:2006, DIN EN 15154-5:2019, ANSI Z358.1-2014, DIN 1988, DIN EN 1717, BGI/GUV-I 850-0, and GOST-R. DIN EN 15154-1 requires self-draining between valve and shower head.

Difference from BR 027 995

BR 028 995 features a larger stainless steel cabinet with removable cover and two stainless steel union connections for easier on-site installation. Selected when recessed mounting and increased internal access are required.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Surface: polished
  • Dimensions (H x W): 400 x 270 mm
  • Operating pressure: 1 to 5 bar
  • Flow rate: at least 60 l/min at 1 bar flow pressure
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The safety shower valve consists of a robust ball valve with drinking water approval. The volume flow is at least 60 liters / minute at 1 bar flow pressure.

Mounting-Instructions:

For an installation in accordance with EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.

DVGW
ISO9001_D_72

Technical Description

  • recessed stainless steel cabinet, cover for maintenance work removable, dimensions (H x W): 400 x 270 mm, installation dimensions (H x W x D): 350 x 220 x 60 mm
  • ball valve ¾“ of stainless steel, with lever actuation, DIN-DVGW tested and certificated
  • including 2x stainless steel union pipe fittings for simplified on-site installation, water inlet ¾” female
  • flow rate at least 60 l/min at 1 bar flow pressure
  • actuation via lever made of stainless steel, polished, length 160 mm, opening angle 90°, not self-closing
  • robust handle of plastics, black, diameter 25 mm, length 90 mm
  • integrated drain valve with automatic or manual drain, mounted on the outside of the lid
  • information sign “OPEN” for confusion-free use in an emergency, orange, photoluminescent according to DIN 67510
  • mounting height for lever according to the standards listed below: 0 to 1750 mm height above floor
  • according to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
  • according to ANSI Z358.1-2014, DIN EN 15154-1:2006 and DIN EN 15154-5:2019

Certification

DVGW    ISO9001_D_72