Globe Valve Angle Bronze JIS 5K - F7302

Bronze Angle Globe Valve JIS 5K F7302

The JIS F7302 is a 90° angle globe valve designed for low-pressure marine piping systems. It features a JIS 5K flanged connection and manual operation via handwheel. The angle pattern is specified where a change in flow direction is required without additional fittings, minimizing connection points and potential leak paths in the network.

Technical Construction

• Design standard: JIS F 7302-1996
• Test standard: JIS F 7400-1996
• Nominal pressure class: JIS 5K
• Body test pressure: 1.05 MPa
• Seat test pressure: 0.77 MPa
• Body material: BC6
• Bonnet: BC6
• Disc: BC6
• Stem: C3771BD or BE
• Handwheel: FC200
• Available DN: 15 to 65

Suitable Media

Primarily used in auxiliary shipboard systems for:

• fresh water
• sea water (corrosion and galvanic compatibility must be verified)
• lubricating or light oils (after seal material compatibility check)
• low-pressure steam, provided temperature and pressure remain within network limits

Marine Applications

• engine room cooling lines
• auxiliary water circuits
• bilge, ballast, or service water systems where bronze equipment is specified
• locations with restricted installation space
• piping requiring both throttling and 90° flow direction change

F7302 vs F7301

The F7301 is a straight-pattern globe valve; F7302 is angle-pattern. F7302 is selected where the pipeline changes direction by 90°. Both types are globe valves suitable for flow regulation, with higher pressure drop compared to full-bore valves.

Selection and Maintenance

Selection should consider DN, JIS 5K flanges, temperature, pressure, media, flow direction, and class requirements. Standard actuation is manual; no electric or pneumatic actuator options are documented. Maintenance focuses on seat, disc, bonnet gasket, and stem sealing integrity.