Industrial safety shower, freestanding, with hand-held eye shower with two spray heads 45° - PremiumLine - BR 834 095 | B-Safety
Industrial safety shower, freestanding, with hand-held eye shower with two spray heads 45° - PremiumLine - BR 834 095 | B-Safety

Industrial safety shower, freestanding, with hand-held eye shower with two spray heads 45° - PremiumLine - BR 834 095 | B-Safety

B-Safety BR 834 095 PremiumLine

Floor-mounted emergency safety shower with manual dual-head 45° eye wash. Designed for industrial environments requiring full body decontamination and targeted eye/face rinsing via a flexible hand-held spray. Requires permanent connection to a 1 ¼” female water supply, with both top and bottom inlet options for installation in circulation lines.

Technical Specifications

  • Series: PremiumLine
  • Material: Stainless steel, polished finish
  • Height: 2300 mm
  • Arm projection: 630 mm
  • Base: Ø200 mm, 4 anchor holes
  • Body operating pressure: 1.5–3 bar dynamic
  • Body flow rate: 50 l/min (options for 75 or 110 l/min)
  • Eye wash flow rate: 14 l/min
  • Eye wash pressure: 2–5 bar
  • Flexible hose: 1.5 m, stainless steel braid, ½” female inlet

Construction and Operation

Equipped with a stainless steel ¾” ball valve featuring quick-connect system and 700 mm pull rod actuator. The body shower head is self-draining and includes integrated flow regulation to maintain a consistent spray pattern within the specified pressure range.

The manual eye wash unit features two 45° spray heads, dust covers, non-self-closing valve on the handle, and integrated backflow protection for potable water networks. Mounting position and orientation are adjustable along the support tube.

Standards and Certifications

Compliant with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also references EN 1717, DIN 1988, DIN-DVGW/DVGW, and GOST-R.

Applications

Chemical plants, laboratories, drum filling stations, acid/alkali storage, water treatment facilities, and areas requiring user- or operator-directed rinsing.

FAQ

When is the dual 45° head version selected?
When simultaneous rinsing of both eyes with manual directional control is required.

What is checked during maintenance?
Flow rate, dynamic pressure, valve tightness, hose condition, head cleanliness, dust covers, and backflow protection function.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification-and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • inclusive ClassicLine hand-held eye shower with two spray heads 45°, for mounting on standpipe, position and orientation freely selectable
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • sturdy wall bracket with positioning of the shower, including mounting kit for mounting on the standpipe
  • sturdy wall bracket with positioning of the shower, including mounting kit for mounting on the standpipe
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72