Ντους Ασφαλείας σώματος B-Safety με ντους ασφαλείας οφθαλμών χειρός τοίχου τύπος PremiumLine BR 863 095 B-Safety - 1
Ντους Ασφαλείας σώματος B-Safety με ντους ασφαλείας οφθαλμών χειρός τοίχου τύπος PremiumLine BR 863 095 B-Safety - 1

Ντους Ασφαλείας σώματος B-Safety με ντους ασφαλείας οφθαλμών χειρός τοίχου τύπος PremiumLine BR 863 095

B-Safety BR 863 095 PremiumLine

Επίτοιχος συνδυασμός ντους ασφαλείας σώματος με ντους οφθαλμών χειρός μίας κεφαλής 45°. Χρησιμοποιείται σε σημεία όπου απαιτείται πλήρης έκπλυση σώματος και ταυτόχρονα κατευθυνόμενη έκπλυση ματιών, προσώπου ή τοπικά εκτεθειμένης περιοχής. Η διάταξη είναι κατάλληλη για εργαστήρια, χημικές αποθήκες, χώρους πλήρωσης δοχείων και βιομηχανικές γραμμές με περιορισμένο διαθέσιμο δάπεδο.

Τεχνικά δεδομένα

  • Τύπος: PremiumLine, επίτοιχος συνδυασμός
  • Υλικό: ανοξείδωτος χάλυβας, γυαλισμένη επιφάνεια
  • Συνολικό ύψος: 1625 mm
  • Προβολή βραχίονα: 630 mm
  • Ύψος εγκατάστασης ντους οφθαλμών: 810 mm ±100 mm
  • Είσοδος νερού: ¾” θηλυκή, άνω/κάτω σύνδεση για γραμμές κυκλοφορίας
  • Πίεση λειτουργίας σώματος: 1,5–3 bar δυναμική πίεση
  • Παροχή σώματος: 50 l/min, με εκδόσεις 75 ή 110 l/min
  • Παροχή οφθαλμών χειρός: 7 l/min σε 1,5–5 bar
  • Εύκαμπτος σωλήνας: 1,5 m, ανοξείδωτη επένδυση, είσοδος ½” θηλυκή

Κατασκευή και λειτουργία

Η σωλήνωση, οι φλάντζες, ο βραχίονας, η σφαιρική βάνα ¾”, η ράβδος έλξης και η κεφαλή σώματος είναι ανοξείδωτα. Η ενεργοποίηση του ντους σώματος γίνεται με ράβδο 700 mm. Η κεφαλή καταιονισμού είναι αυτοαποστραγγιζόμενη και διαθέτει ενσωματωμένη ρύθμιση ροής 50 l/min για καθορισμένο μοτίβο έκπλυσης στο εύρος 1,5–3 bar.

Ντους οφθαλμών χειρός

Η χειροκίνητη κεφαλή 45° διαθέτει εργονομική λαβή, ρυθμιζόμενη ενεργοποίηση και μη αυτοκλειόμενη βαλβίδα. Περιλαμβάνει καλύμματα σκόνης, προστασία επιστροφής ροής και βάση τοίχου/πάγκου. Η λύση επιλέγεται όταν η έκπλυση πρέπει να κατευθύνεται από τον χρήστη ή από δεύτερο χειριστή συντήρησης.

Πρότυπα και έλεγχοι

Αναφέρεται συμμόρφωση με EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019 και ANSI Z358.1-2014. Επίσης αναφέρονται DIN 1988, EN 1717, DIN-DVGW/DVGW και GOST-R.

Συντήρηση

Περιοδικός έλεγχος παροχής, δυναμικής πίεσης, στεγανότητας βανών, κατάστασης εύκαμπτου σωλήνα, καθαρότητας κεφαλής, καλυμμάτων σκόνης και λειτουργίας της μη αυτοκλειόμενης βαλβίδας.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 1625 mm
  • Projection: 630 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • two connection pipes ¾“ of stainless steel, polished, total length 1500 mm
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • inclusive ClassicLine hand-held eye shower with one spray head 45°, wall mounted
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • robust table and wall mounting bracket with positioning of the shower, incl. fastening-parts kit with nut M28x1,5mm and 2 screws M5 for mounting difficult to access, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72