Ντους Ασφαλείας σώματος με ντους ασφαλείας οφθαλμών B-Safety για εγκατάσταση πάνω από την πόρτα τύπος ClassicLine BR 874 085 B-S
Ντους Ασφαλείας σώματος με ντους ασφαλείας οφθαλμών B-Safety για εγκατάσταση πάνω από την πόρτα τύπος ClassicLine BR 874 085 B-S

Ντους Ασφαλείας σώματος με ντους ασφαλείας οφθαλμών B-Safety για εγκατάσταση πάνω από την πόρτα τύπος ClassicLine BR 874 085

B-Safety BR 874 085 ClassicLine

Επίτοιχος συνδυασμός ντους ασφαλείας σώματος με ντους οφθαλμών χειρός δύο κεφαλών 45°, για εγκατάσταση πάνω από πόρτα ή άνοιγμα διέλευσης. Χρησιμοποιείται όταν η θέση έκπλυσης πρέπει να τοποθετηθεί σε περιορισμένο τοίχο, χωρίς επιδαπέδια βάση και χωρίς σταθερή λεκάνη οφθαλμών.

Τεχνικά δεδομένα

  • Τύπος: ClassicLine, εγκατάσταση πάνω από πόρτα
  • Υλικά: ανοξείδωτος χάλυβας και πλαστικά μέρη
  • Χρώμα: πράσινο / μαύρο
  • Συνολικό ύψος: 1625 mm
  • Προβολή βραχίονα: 525 mm
  • Ύψος εγκατάστασης: 810 mm ±100 mm
  • Είσοδος νερού: ¾” θηλυκή, άνω/κάτω σύνδεση για γραμμή κυκλοφορίας
  • Πίεση σώματος: 1,5–3 bar
  • Παροχή σώματος: 50 l/min, με εκδόσεις 75 ή 110 l/min
  • Παροχή οφθαλμών χειρός: 14 l/min σε 1,5–5 bar
  • Εύκαμπτος σωλήνας: 1,5 m, είσοδος ½” θηλυκή

Κατασκευή και λειτουργία

Η σωλήνωση, οι φλάντζες και ο βραχίονας είναι ανοξείδωτα, με πράσινη χημικά ανθεκτική βαφή πούδρας. Το ντους σώματος ενεργοποιείται με ράβδο έλξης 700 mm και σφαιρική βάνα ¾” από ορείχαλκο ανθεκτικό σε αποψευδαργύρωση. Η κεφαλή σώματος είναι πλαστική, αυτοαποστραγγιζόμενη και διαθέτει ρύθμιση ροής 50 l/min.

Ντους οφθαλμών χειρός δύο κεφαλών

Η χειροκίνητη μονάδα διαθέτει δύο κεφαλές 45°, εργονομική λαβή με ρυθμιζόμενη ενεργοποίηση και μη αυτοκλειόμενη βαλβίδα. Περιλαμβάνει καλύμματα σκόνης, προστασία επιστροφής ροής και βάση τοίχου ή πάγκου. Η παροχή 14 l/min απαιτεί έλεγχο διαθέσιμης δυναμικής πίεσης πριν την εγκατάσταση.

Πρότυπα

Αναφέρεται συμμόρφωση με ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 και EN 15154-5:2019. Αναφέρονται επίσης DIN 1988, EN 1717, DIN-DVGW/DVGW και GOST-R.

Συντήρηση

Περιοδικός έλεγχος παροχής, δυναμικής πίεσης, στεγανότητας βανών, κατάστασης εύκαμπτου σωλήνα, καθαρότητας δύο κεφαλών, καλυμμάτων σκόνης, προστασίας επιστροφής ροής και ελεύθερης κίνησης της ράβδου έλξης.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Total height: 1625 mm
  • Projection: 525 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the ClassicLine series are made of high-quality materials and are just as suitable for use in laboratories and research as they are for rough use in industry. B-SAFETY’s green chemical-resistant polyester powder coating has proven itself in many aggressive environments and is resistant to many acids and alkalis.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange made of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • inclusive ClassicLine hand-held eye shower with two spray heads 45°, wall mounted
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • robust table and wall mounting bracket with positioning of the shower, incl. fastening-parts kit with nut M28x1,5mm and 2 screws M5 for mounting difficult to access, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • two connection pipes ¾“ of stainless steel, chemical resistant green powder coated, total length 1500 mm
  • wall flange as T-version with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • connection adapter of stainless steel, polished, with integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • connection pipe ¾“ of stainless steel, chemical resistant green powder coated, length 75 mm
  • ball valve ¾” of made of dezincification-resistant brass, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • holder for pull rod made of steel, chemical resistant green powder coated
  • connection pipe ¾“ of stainless steel, chemical resistant green powder coated, length 500 mm
  • wall flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 525 mm
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72