Ντους ασφαλείας οφθαλμών B-Safety με ανοξείδωτο καπάκι καμπίνα και ενσωματωμένη βαλβίδα τύπος PremiumLine BR 285 095
B-Safety PremiumLine BR 285 095 – ντους οφθαλμών σε ανοξείδωτη καμπίνα με ενσωματωμένη βαλβίδα
Το BR 285 095 είναι σταθερό ντους ασφαλείας οφθαλμών, εντοιχιζόμενης επιτοίχιας εγκατάστασης, σε ανοξείδωτη καμπίνα PremiumLine με γυαλισμένη επιφάνεια. Η διάταξη χρησιμοποιείται σε σημεία όπου οι κεφαλές έκπλυσης πρέπει να προστατεύονται μέσα σε κλειστή καμπίνα και να ενεργοποιούνται άμεσα από τον χειριστή.
Τεχνικά χαρακτηριστικά
Παροχή: 14 l/min
Πίεση λειτουργίας: 2,5–5 bar
Σύνδεση εισόδου νερού: ¾” θηλυκό
Έξοδος νερού: ¾” αρσενικό
Διαστάσεις καμπίνας: 425 × 305 × 100 mm
Άνοιγμα τοποθέτησης: 380 × 260 mm
Ύψος εγκατάστασης: 865 mm ±200 mm
Λειτουργία και υλικά
Η ενεργοποίηση γίνεται με άνοιγμα της περιστρεφόμενης πόρτας. Η πόρτα ενεργοποιεί ταυτόχρονα τη σφαιρική βάνα ¾” από ανοξείδωτο χάλυβα, ώστε η ροή προς τις δύο κεφαλές να ξεκινά χωρίς ξεχωριστό χειρισμό. Η ένδειξη OPEN είναι πορτοκαλί, φωτοφωταυγής κατά DIN 67510.
Οι κεφαλές ψεκασμού είναι ανοξείδωτες, γυαλισμένες, με πλαστική πλάκα ψεκασμού, ελαστικά προστατευτικά και στεγανοποιημένα καλύμματα σκόνης. Ο ρυθμιστής ροής περιορίζει την παροχή στα 14 l/min για ελεγχόμενο μοτίβο έκπλυσης στο εύρος 2,5–5 bar.
Πρότυπα και συμμόρφωση
Το προϊόν αναφέρεται σύμφωνα με EN 15154-2:2006, ANSI Z358.1-2014, DIN 1988, EN 1717, BGI/GUV-I 850-0 και πιστοποίηση DIN-DVGW NW-0417CL0263. Η σήμανση ντους οφθαλμών στην πόρτα είναι κατά EN ISO 7010 / ASR A1.3, αυτοκόλλητη PVC 100 × 100 mm, με απόσταση αναγνώρισης 10 m.
Εφαρμογές
Κατάλληλο για καθαρό νερό δικτύου σε χημικά εργαστήρια, φαρμακευτική παραγωγή, μονάδες επεξεργασίας νερού, χώρους CIP, βαφεία, σταθμούς δειγματοληψίας και περιοχές όπου απαιτείται προστατευμένη διάταξη έκπλυσης οφθαλμών σε εντοιχισμένη εγκατάσταση.
Επιλογή έναντι BR 270 095
Το BR 285 095 επιλέγεται όταν απαιτείται ενσωματωμένη βαλβίδα ενεργοποίησης στην καμπίνα. Σε εφαρμογές όπου αρκεί απλή καμπίνα ντους οφθαλμών, αξιολογείται η αντίστοιχη διάταξη χωρίς την ίδια διαμόρφωση ενσωματωμένης βαλβίδας.
The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.
The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. The large holes in the shower heads prevent standing water and thus calcification. The orange, photoluminescent “OPEN” sign indicates that the unit can be used without confusion in an emergency.
Technical Description
housing of stainless steel, polished, recessed wall mounting, dimensions (H x W x D): 425 x 305 x 100 mm, mounting hole dimension (H x W): 380 x 260 mm
integrated swivel door of stainless steel, polished, with simultaneous triggering of the eye shower when the door is swung down
Sign “OPEN” for confusion-free use in emergencies, orange, photoluminescent according to DIN 67510
ball valve 3/4” of stainless steel, with swivel door actuation, DIN-DVGW tested and certificated
high-performance spray heads made of stainless for large-scale dispersion of water, polished, with plastic spray plate, low calcification, incl rubber sleeves and sealed dust caps, mounted over distributor fork
integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2.5 to 5 bar flow pressure
inclusive sign for eye shower according to EN ISO 7010 und ASR A1.3 on the swivel door, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
height 425 mm, width 305 mm, depth 100 mm
mounting hole dimension 380 x 260 mm
mounting height 865 mm (± 200 mm)
according to BGI/GUV-I 850-0, DIN 1988 and EN 1717