Αυτόνομο Ντους ασφαλείας σώματος/Οφθαλμών B-Safety με λεκάνη αποστράγγισης τύπος PremiumLine BR 837 595 B-Safety - 1
Αυτόνομο Ντους ασφαλείας σώματος/Οφθαλμών B-Safety με λεκάνη αποστράγγισης τύπος PremiumLine BR 837 595 B-Safety - 1

Αυτόνομο Ντους ασφαλείας σώματος/Οφθαλμών B-Safety με λεκάνη αποστράγγισης τύπος PremiumLine BR 837 595

B-Safety BR 837 595 PremiumLine

Αυτόνομο ντους ασφαλείας σώματος/οφθαλμών δαπέδου, με ανοξείδωτη λεκάνη και αποστράγγιση του ντους οφθαλμών μέσω του σωλήνα στήριξης. Η διάταξη μειώνει τις εμφανείς σωληνώσεις αποχέτευσης στη ζώνη χειρισμού και απαιτεί παροχή νερού 1 ¼” θηλυκή και έξοδο 1 ¼” αρσενική.

Τεχνικά δεδομένα

  • Διαστάσεις: 2300 x 400 x 630 mm
  • Βάση: ανοξείδωτη Ø200 mm με 4 οπές αγκύρωσης
  • Παροχή σώματος: 50 l/min
  • Παροχή οφθαλμών: 14 l/min
  • Πίεση σώματος: 1,5–3 bar δυναμική πίεση
  • Πίεση οφθαλμών: 2,5–5 bar
  • Λεκάνη: ανοξείδωτη Ø275 mm
  • Πλάκα ενεργοποίησης οφθαλμών: PUSH, 240 mm, φωσφορίζουσα κατά DIN 67510

Υλικά και λειτουργία

Η σωλήνωση, η κεφαλή σώματος, η σφαιρική βάνα, η βάση, η ράβδος έλξης, το ντους οφθαλμών και ο σωλήνας αποστράγγισης είναι AISI 316. Η λεκάνη οφθαλμών είναι AISI 304. Οι ρυθμιστές ροής είναι POM και οι κεφαλές οφθαλμών περιλαμβάνουν ανοξείδωτο, POM και EPDM.

Η ενεργοποίηση του ντους σώματος γίνεται με ανοξείδωτη ράβδο έλξης 700 mm και σφαιρική βάνα ¾”. Το ντους οφθαλμών ενεργοποιείται με βάνα ½” και μοχλό PUSH. Οι κεφαλές οφθαλμών έχουν καλύμματα σκόνης με ανακλινόμενο μηχανισμό, χρήσιμα σε χώρους με σκόνη, άλατα ή χημικά αερολύματα.

Πρότυπα και εκδόσεις

Συμμόρφωση με EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, ANSI Z358.1-2014, EN 1717 και DIN 1988. Διατίθενται εκδόσεις 50 l/min hazard class I, 75 l/min hazard class II και 110 l/min hazard class III κατά EN 15154-5:2019.

Εφαρμογές

Χημικές μονάδες, εργαστήρια, χώροι CIP, αποθήκες οξέων/αλκαλίων, επεξεργασία νερού και θέσεις πλήρωσης δοχείων. Το μέσο λειτουργίας είναι νερό έκπλυσης κατάλληλης θερμοκρασίας· για έλεγχο θερμοκρασίας προβλέπεται θερμοστατική ανάμιξη 20–43°C και προστασία εγκαύματος στους 43°C ως πρόσθετος εξοπλισμός.

FAQ

Τι αλλάζει σε σχέση με τη βασική έκδοση με λεκάνη;
Η αποστράγγιση του ντους οφθαλμών γίνεται μέσω του σωλήνα στήριξης.

Τι ελέγχεται στη συντήρηση;
Παροχή, δυναμική πίεση, στεγανότητα βανών, καθαρότητα κεφαλών, καλύμματα σκόνης και ελεύθερη απορροή από τη λεκάνη.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcificationand maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • integrated PremiumLine safety eye shower with stainless steel bowl mounting height 970 mm, orientation of eye shower freely selectable on site
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 240 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2.5 to 5 bar flow pressure
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • bowl made of stainless steel, diameter 275 mm, polished, water outlet 1 ¼” male
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72