List of products by brand Genebre

Genebre – Technical profile of a valve, flow control and automation accessories manufacturer

Genebre is a Spanish manufacturer of valves and flow control components for plumbing, HVAC, gas, water, industrial utilities and general process applications. The company’s industrial product range includes ball valves, butterfly valves, gate valves, check valves, strainers, safety valves, pressure reducing valves, flow switches, expansion joints and automation components.

The Genebre product range represented by Philippopoulos S.A. includes:

  • two-way ball valves,
  • three-way ball valves,
  • check valves,
  • Y strainers,
  • gate valves,
  • needle valves,
  • safety valves,
  • flow indicators and flow switches,
  • fire protection butterfly valves,
  • rubber and metallic expansion joints,
  • pneumatic On/Off valves.

Genebre ball valves are mainly used for isolation service. They are available in threaded, flanged, welded, wafer and camlock configurations, depending on the series. Three-way L-port and T-port valves are used for diverting or selecting flow paths. V-port ball valves are used when a more controlled flow characteristic is required.

Check valves must be selected according to flow direction, installation position, cracking pressure, spring arrangement and risk of water hammer. Disc check valves and swing check valves have different dynamic behaviour and should not be considered interchangeable without checking the application.

Y strainers are used upstream of pumps, control valves, meters and sensitive equipment. Selection requires mesh or perforation size, pressure drop, access for cleaning and drain arrangement.

Genebre safety valves and pressure relief components require proper sizing. Set pressure, required relieving capacity, back pressure, temperature and medium must be defined before selection.

Genebre is suitable for HVAC systems, water networks, compressed air, industrial utilities, fire protection networks and general process services. Engineers should select each valve according to function on the P&ID, pressure-temperature rating, material compatibility and required certification.

Strainer Y Flanged ANSI B 16.5 S-150 - 2461A | Genebre | Philippopoulos s.a.

Strainer Y Flanged ANSI B 16.5 S-150 - 2461A | Genebre

Strainer Y Flanged ANSI B 16.5 S-150 - 2461A | Genebre
Genebre
Genebre 2461A Y-Strainer, ANSI Class 150 The Genebre 2461A is a stainless steel Y-type strainer with flanged ends according to ANSI B16.5 Class 150. It is designed for retention of solid particles in water, air, compatible industrial fluids, and utility lines upstream of pumps, control valves, flow meters, heat exchangers, and equipment with restricted...
View
Metal expansion joint with internal liner - 2834 | Genebre | Philippopoulos s.a.

Metal expansion joint with internal liner - 2834 | Genebre

Metal expansion joint with internal liner - 2834 | Genebre
Genebre
Genebre 2834 Axial Expansion Joints The Genebre 2834 are metallic axial expansion compensators with welded ends, constructed from AISI 304 / 1.4301 stainless steel and equipped with an internal flow liner. Designed for axial thermal movement in straight pipe sections and for limiting mechanical vibrations. Construction Welded ends: stainless steel 304...
View
Metal expansion joint with internal liner - 2835AE | Genebre | Philippopoulos s.a.

Metal expansion joint with internal liner - 2835AE | Genebre

Metal expansion joint with internal liner - 2835AE | Genebre
Genebre
Genebre 2835AE Axial Expansion Joints Genebre 2835AE are metallic axial expansion compensators with ANSI B16.5 Class 150 flanges and an internal flow liner. Designed for axial compensation of thermal pipe movements and reduction of transmitted vibration in metallic piping systems compatible with stainless AISI 304 / 1.4301. Construction Sizes:...
View
Metal expansion joint with internal liner - 2835E | Genebre | Philippopoulos s.a.

Metal expansion joint with internal liner - 2835E | Genebre

Metal expansion joint with internal liner - 2835E | Genebre
Genebre
Axial Expansion Joints Genebre 2835E Genebre 2835E are metallic axial expansion compensators with flanged ends EN 1092 PN16 and internal flow liner. Designed for axial compensation of thermal pipe movements and for vibration attenuation in water, hot fluid, or compatible gas networks. Construction Sizes: DN25–DN200, 1"–8" Pressure class: PN16 Bellows and...
View
Rubber expansion joints - Rubber expansion - joint-single wave - 2831 | Genebre | Philippopoulos s.a.

Rubber expansion joints - Rubber expansion - joint-single wave - 2831 | Genebre

Rubber expansion joints - Rubber expansion - joint-single wave - 2831 | Genebre
Genebre
Genebre 2831 – Single Arch Rubber Expansion Joint The Genebre 2831 is a flanged expansion joint designed for vibration absorption, noise reduction, and compensation of pipe movements in industrial piping systems. The body is constructed from EPDM reinforced with nylon, with a retaining ring and flanges made of galvanized carbon steel. Technical Data...
View
Rubber expansion joints - Rubber expansion joint - 2831A | Genebre | Philippopoulos s.a.

Rubber expansion joints - Rubber expansion joint - 2831A | Genebre

Rubber expansion joints - Rubber expansion joint - 2831A | Genebre
Genebre
Genebre 2831A – ANSI 150 Rubber Expansion Joint The Genebre 2831A is a single-arch, flanged rubber expansion joint designed for piping systems requiring vibration absorption, noise reduction, and compensation for axial or lateral movement. The body is constructed from EPDM reinforced with nylon; flanges and retaining rings are galvanized carbon steel....
View
Rubber expansion joints - Rubber expansion joint-double wave - 2830 | Genebre | Philippopoulos s.a.

Rubber expansion joints - Rubber expansion joint-double wave - 2830 | Genebre

Rubber expansion joints - Rubber expansion joint-double wave - 2830 | Genebre
Genebre
Genebre 2830 – EPDM Expansion Joint, Double Wave The Genebre 2830 is a vibration-absorbing expansion joint constructed with an EPDM + nylon body and galvanized carbon steel threaded ends. It is designed for piping systems requiring vibration isolation, noise reduction, and compensation for minor axial or lateral movements. Technical Specifications...
View
Rubber expansion joints - Rubber expansion joint-double wave - NPT thread - 2830N | Genebre | Philippopoulos s.a.

Rubber expansion joints - Rubber expansion joint-double wave - NPT thread - 2830N | Genebre

Rubber expansion joints - Rubber expansion joint-double wave - NPT thread - 2830N | Genebre
Genebre
Genebre 2830N – NPT Expansion Joint, Double Corrugation The Genebre 2830N is an expansion joint for piping systems with NPT threaded ends. The body is constructed from EPDM reinforced with nylon, while metallic components are galvanized carbon steel. This joint is designed for vibration absorption, noise reduction, and compensation of axial or lateral...
View
Rubber expansion joints - Rubber expansion joint-double wave EPDM - 2833 | Genebre | Philippopoulos s.a.

Rubber expansion joints - Rubber expansion joint-double wave EPDM - 2833 | Genebre

Rubber expansion joints - Rubber expansion joint-double wave EPDM - 2833 | Genebre
Genebre
Genebre 2833 – EPDM Double Arch Expansion Joint The Genebre 2833 is a flanged expansion joint designed for water pipelines and auxiliary industrial networks. The double arch configuration increases movement absorption compared to single arch types, supporting installation in pump assemblies, HVAC systems, and piping subject to vibration or thermal...
View
Ball Check Valve - 2417 | Genebre | Philippopoulos s.a.

Ball Check Valve - 2417 | Genebre

Ball Check Valve - 2417 | Genebre
Genebre
Genebre 2417 – Ball Type Check Valve The Genebre 2417 is a ball check valve with threaded ends, designed for unidirectional flow in small-diameter liquid lines. The internal ball is displaced by differential pressure and reseats when flow decreases or reverse pressure occurs. This valve operates without an actuator. Construction Body, cover, and ends:...
View
Ball Check Valve - 2453 | Genebre | Philippopoulos s.a.

Ball Check Valve - 2453 | Genebre

Ball Check Valve - 2453 | Genebre
Genebre
Genebre 2453 – Flanged Ball Check Valve The Genebre 2453 is a flanged-end ball check valve designed for liquid lines where suspended solids, increased viscosity, or viscous media are present. The ball is actuated by differential flow pressure and reseats when flow decreases or reverse pressure occurs. No actuator is required. Construction Body and cover:...
View
3 Way (T) (L) Ball Valve - 2540 L bore - 2541 T bore | Genebre | Philippopoulos s.a.

3 Way (T) (L) Ball Valve - 2540 L bore - 2541 T bore | Genebre

3 Way (T) (L) Ball Valve - 2540 L bore - 2541 T bore | Genebre
Genebre
Genebre 2540 / 2541 Three-Way Flanged Ball Valve The Genebre 2540 / 2541 series consists of full-bore, three-way ball valves with flanged ends according to EN 1092. Model 2540 features an L-port ball for flow diversion, while 2541 uses a T-port ball for alternative flow paths or distribution, depending on the selected flow plan. Construction and...
View
Ball Valve V control - 3 pieces - 2027V | Genebre | Philippopoulos s.a.

Ball Valve V control - 3 pieces - 2027V | Genebre

Ball Valve V control - 3 pieces - 2027V | Genebre
Genebre
Genebre 2027V Analog V-Port Ball Valve The Genebre 2027V is a three-piece stainless steel flow control ball valve with a V-port ball and Socket Weld ANSI B16.11 ends. Based on the 2027 series, it is specified where welded line connections are required instead of threaded ends, supporting robust installation in process lines. Technical Data Construction:...
View
Ball Valve threaded ends - 1 pc reduced bore ball valve - 2001 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 1 pc reduced bore ball valve - 2001 | Genebre

Ball Valve threaded ends - 1 pc reduced bore ball valve - 2001 | Genebre
Genebre
Genebre 2001 one-piece ball valve The Genebre 2001 is a reduced-bore, one-piece ball valve for manual isolation of small process and utility lines. The body is polished AISI 316 / 1.4408 stainless steel, with PTFE seats and BSP gas threads according to ISO 7-1 / EN 10226-1. Operating conditions Nominal pressure: PN63, subject to pressure-temperature...
View
Ball Valve threaded ends - 1 pc reduced bore ball valve - 2004 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 1 pc reduced bore ball valve - 2004 | Genebre

Ball Valve threaded ends - 1 pc reduced bore ball valve - 2004 | Genebre
Genebre
Genebre 2004 BSP Stainless Steel Ball Valve The Genebre 2004 is a one-piece, reduced-bore ball valve with female Gas threads to ISO 7-1 / EN 10226-1. The body material is CF8M / AISI 316 stainless steel, with PTFE seats, PN63 pressure rating, and an operating temperature range of -25°C to +180°C, subject to pressure-temperature derating and media...
View
Ball Valve threaded ends - 1 pc reduced bore ball valve F-F - 2006 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 1 pc reduced bore ball valve F-F - 2006 | Genebre

Ball Valve threaded ends - 1 pc reduced bore ball valve F-F - 2006 | Genebre
Genebre
Genebre 2006 F-F stainless steel ball valve The Genebre 2006 is a one-piece reduced-bore ball valve with female threaded ends F-F Gas ISO 7-1 / EN 10226-1. The body is polished AISI 316 stainless steel, with PTFE seats, pressure rating PN63, and operating temperature range -25°C to +180°C, subject to pressure-temperature derating and media compatibility....
View
Ball Valve threaded ends - 1 pc reduced bore ball valve M-F - 2005 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 1 pc reduced bore ball valve M-F - 2005 | Genebre

Ball Valve threaded ends - 1 pc reduced bore ball valve M-F - 2005 | Genebre
Genebre
Genebre 2005 M-F Ball Valve The Genebre 2005 is a one-piece, reduced-bore ball valve with male-female threaded ends to Gas ISO 7-1 / EN 10226-1. The body is polished stainless steel AISI 316 / 1.4408, with PTFE seats, pressure rating PN63, and operating temperature range from -25°C to +180°C, subject to the pressure-temperature limits of the seat...
View
Ball Valve threaded ends - 1 pc reduced bore ball valve NPT thread - 2002 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 1 pc reduced bore ball valve NPT thread - 2002 | Genebre

Ball Valve threaded ends - 1 pc reduced bore ball valve NPT thread - 2002 | Genebre
Genebre
Genebre 2002 NPT Ball Valve The Genebre 2002 is a one-piece, reduced-bore ball valve with female NPT ANSI B2.1 threaded ends. The body is stainless steel CF8M / 316, with PTFE seats, nominal pressure PN63, and a temperature range of -25°C to +180°C. Valve Construction and Selection Logic The one-piece body reduces external leak paths compared with...
View
Ball Valve threaded ends - 2 pcs full bore ball valve - 2011 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 2 pcs full bore ball valve - 2011 | Genebre

Ball Valve threaded ends - 2 pcs full bore ball valve - 2011 | Genebre
Genebre
Genebre 2011 full bore ball valve The Genebre 2011 is a two-piece full bore ball valve with female BSP threads to ISO 7-1 / EN 10226-1. The body material is stainless steel CF8 / AISI 304. Standard sealing is based on PTFE + 15% glass fibre seats and a Viton stem O-ring. Rated pressure is PN40, with an operating temperature range of -25°C to +180°C,...
View
Ball Valve threaded ends - 2 pcs full bore ball valve - 2014 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 2 pcs full bore ball valve - 2014 | Genebre

Ball Valve threaded ends - 2 pcs full bore ball valve - 2014 | Genebre
Genebre
Genebre 2014 full bore ball valve The Genebre 2014 is a two-piece, full bore ball valve with female BSP threaded ends to ISO 7-1 / EN 10226-1. The body is stainless steel CF8M / 316, with PTFE + 15% glass fibre seats and seals, Viton stem O-ring, PN63 pressure rating and operating temperature range from -25°C to +180°C. Sizes and operation Available...
View
Ball Valve threaded ends - 2 pcs full bore ball valve - 2015 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 2 pcs full bore ball valve - 2015 | Genebre

Ball Valve threaded ends - 2 pcs full bore ball valve - 2015 | Genebre
Genebre
Genebre 2015 full bore ball valve The Genebre 2015 is a two-piece full bore ball valve with female threaded ends to BSP ISO 7-1 / EN 10226-1. The body is AISI 316 / 1.4408. Seats and body seals are PTFE + 15% glass fibre, with a Viton stem O-ring. Nominal pressure rating is PN63. Operating temperature range is -25°C to +180°C, subject to pressure, medium,...
View
Ball Valve threaded ends - 2 pcs full bore ball valve F-F - 2009 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 2 pcs full bore ball valve F-F - 2009 | Genebre

Ball Valve threaded ends - 2 pcs full bore ball valve F-F - 2009 | Genebre
Genebre
Genebre 2009 full-bore ball valve The Genebre 2009 is a two-piece full-bore ball valve for on/off isolation duties. It has female threaded ends to BSP ISO 7-1 / EN 10226-1, a CF8M / AISI 316 stainless steel body, PTFE + 15% glass fibre seats, Viton stem O-ring, PN63 pressure rating, and an operating temperature range of -25°C to +180°C, subject to...
View
Ball Valve threaded ends - 2 pcs full bore ball valve M-F - 2010 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 2 pcs full bore ball valve M-F - 2010 | Genebre

Ball Valve threaded ends - 2 pcs full bore ball valve M-F - 2010 | Genebre
Genebre
Genebre 2010 M-F Full Bore Ball Valve The Genebre 2010 is a two-piece, full bore ball valve with male-female threaded ends to Gas ISO 7-1 / EN 10226-1. The body is stainless steel CF8M / 316, with PTFE + 15% glass fibre seats, Viton stem O-ring, PN63 pressure rating and operating temperature range from -25°C to +180°C. Sizes, Connections and Operation...
View
Ball Valve threaded ends - 2 pcs full bore ball valve M-F - 2013 | Genebre | Philippopoulos s.a.

Ball Valve threaded ends - 2 pcs full bore ball valve M-F - 2013 | Genebre

Ball Valve threaded ends - 2 pcs full bore ball valve M-F - 2013 | Genebre
Genebre
Genebre 2013 M-F full-bore ball valve The Genebre 2013 is a two-piece stainless steel ball valve with full-bore flow passage and male-female Gas threads to ISO 7-1 / EN 10226-1. The body material is CF8M / 316 stainless steel. Standard sealing uses PTFE + 15% glass fibre seats and a Viton stem O-ring. Rated pressure is PN63, with an operating temperature...
View